10' x 7.4' SEGO Modular Lightbox Display Configuration D Double-Sided

A 10 ft. double-sided lightbox back wall built from two panels of different widths, so the wall steps rather than running flat. Configuration D pairs a 78 in. panel with a 40 in. panel, joined by a height-and-straight connector, and both faces carry backlit graphics.

The LEDs are not an accessory bolted on afterward. They are pre-installed inside the aluminum extrusions, and magnetic electrical connectors carry power between frame sections as the sections lock together — which is why there are no visible wires running across the back of the wall.

Key Features

• LEDs built into the frame: UL-certified LED strips come pre-installed in the profiles. Magnetic connectors pass power from section to section, so the wiring is inside the aluminum where nobody sees it.

• Tool-free, down to the feet: Frame sections and feet assemble without tools or fasteners. There is nothing in the crate that can be dropped into the carpet and lost.

• Double-sided by default: Backlit SEG graphics cover the front and the back of the frame, so the wall works as an island or a room divider, not just as a backdrop against a curtain.

• Stepped two-panel layout: The 78 in. and 40 in. panels give the wall depth and let you place a monitor or a counter against the shorter section.

• Reconfigurable: The panels are modular. The same frames can be rearranged into other SEGO layouts as booth sizes change from show to show.

• Foam-cut travel bags: Each section ships in a bag with cut foam that holds the frame, the graphic and the electrical parts in their own places.

Specifications

• Assembled size: 118 in. W x 88.25 in. H x 16.5 in. D
• Graphic size — tall panel: 78.125 in. W x 88.625 in. H
• Graphic size — short panel: 39.75 in. W x 88.625 in. H
• Sides printed: double-sided
• Frame: aluminum extrusion, tool-free, LED strips pre-installed
• Electrical: magnetic connectors between sections, standard outlet
• Graphic material: dye-sublimated backlit SEG fabric with silicone edge
• Ship cartons: three, each 54.5 in. x 15.5 in. x 6.75 in.
• Ship weight: about 32 lbs per carton, frame and graphic together
• Setup: two people, tool-free; the frame locks together and the feet slip on

What's Included

• (1) 78 in. wide backlit frame section with LEDs pre-installed
• (1) 40 in. wide backlit frame section with LEDs pre-installed
• Double-sided dye-sublimated backlit SEG fabric graphics for both sections
• (1) height connector and (1) straight connector
• Feet, transformer, power cabling and foam-cut travel bags

Shipping

Shipping on this display is quoted at checkout. It goes out as three cartons of 54.5 x 15.5 x 6.75 in., roughly 32 lbs each.

Where a 10 ft. lightbox wall fits

This is a back wall for a 10x10 inline booth, and its depth also makes it work as a freestanding divider in a 10x20 or an island. Because both faces are printed, aisle traffic coming from either direction reads a graphic rather than a black frame.

Away from the exhibit hall, lit walls of this size hold up as permanent fixtures: lobby and atrium branding, showroom walls, hospital and clinic entrances, university recruiting spaces and conference registration. The graphic changes with the campaign; the frame stays.

Ordering from Stow, Ohio

Backlit artwork behaves differently from ordinary print — light passing through fabric flattens contrast and can wash out a dark logo. We lay out the graphics, proof them, and say plainly when something in the artwork will not read once it is lit.

For customers across Northeast Ohio — Akron, Cleveland, Canton, Kent, Hudson, Youngstown — we deliver the wall, set it up at the venue and store it between shows, then reprint graphics for the next one. Outside the region it ships in its travel bags.

Show rules vary. Check your show's guidelines before ordering, and if the configuration needs adjusting to meet them, email sales@dgcreativ.com and we will quote the change.

Frequently Asked Questions

Are the LED lights included, or do I add them?
Included, and already installed. The LED strips sit inside the aluminum profiles before the display leaves the shop. You plug the transformer into a standard outlet.

Where do the wires run?
Inside the frame. Power passes between sections through magnetic contacts at the joints, so there is no cabling visible on the back of the wall.

Do I need tools or union labor to set it up?
No tools. Two people can assemble it. Whether you may do your own setup depends on the venue's labor rules, not on the display — check the exhibitor kit for the hall.

Can this configuration be rearranged for a different booth size?
Yes. The frames are modular and can be rebuilt into other SEGO layouts. Tell us the footprints you expect over the next couple of years and we will say whether this set of panels covers them.

Can I reprint just the graphics?
Yes. The frame and lighting are the long-term investment. Send new artwork and we print replacement SEG graphics to the same panel sizes.

Will it fit my show's height limit?
It stands 88.25 in., a little over 7 ft. 4 in., which clears the usual 8 ft. inline back wall limit. Confirm against your own show's rules.

Related: All backlit and lightbox displays · SEGO 20 ft. Configuration A · SEGO 10 ft. Configuration E with returns · Turnkey trade show programs · Request a quote