2.5 x 7.5 ft. Lumiere Light Wall® Backlit

The same 30.5-inch wide panel as the unlit 2.5 x 7.5, with three LED ladder light sets mounted inside the frame so the graphic lights from behind rather than being washed from the front. A backlit fabric face and a blockout panel behind it are both in the package, which is what keeps the output even instead of showing the lamps through the print. One person builds it in about 25 minutes. Frame and graphics ship in one 34 x 14 x 9 in. box at 22 lbs, lights in a second at 8 lbs.

Several of these connect side by side for a wider wall and you still need only one pair of end caps. Two of them also make the legs of an archway: add the Lumiere Light Wall Bridge to span the gap between them. The Bridge is a separate purchase and the towers are not included with it, so a two-tower arch is three line items — two of these and one Bridge.

The frame profile is proprietary to Lumiere. These panels connect to other Lumiere frames and to the Bridge and Door accessories, and to nothing from another manufacturer's system.

*Ladder lights are installed on one side of the frame only. Single and double-sided displays use the same quantity of lights. Lights do not need to be installed on the backside of the frame for double-sided graphics.
*Hard case options will hold 1 frame w/bag, channel bars w/bags and a full set of LED ladder lights with transformers for frame sizes up to 10' x 7.5'

Lumiere Light Wall® 2.5ft x 7.5ft Single-Sided Graphic Package Includes:

• (1) Pop Up Frame
• (2) 1-Section Channel Bars
• (4) 3-Section Channel Bars
• (1) Channel Bar Bag
• (1) Carry Bag (for frame)
• (3) Ladder Light Sets
• (1) Travel Bag for Ladder Lights
• (1) Transformer
• (1) Transformer Power Cord
• (1) 2.5ft x 7.5ft backlit graphic
• (1) 2.5ft x 7.5ft block out panel
• (2) End Caps (Non-Printed)
• * Printed End Caps are also available

Lumiere Light Wall® 2.5ft x 7.5ft Double-Sided Graphic Package Includes:

• (1) Pop Up Frame
• (4) 1-Section Channel Bars
• (4) 3-Section Channel Bars
• (1) Channel Bar Bag
• (1) Carry Bag (for frame)
• (3) Ladder Light Sets
• (1) Travel Bag for Ladder Lights
• (1) Transformer
• (1) Transformer Power Cord
• (2) 2.5ft x 7.5ft backlit graphics
• (2) End Caps (Non-Printed)
• * Printed End Caps are also available

Display Dimensions: 30.5" W x 88.75" H x 14.5" D
Graphic Dimensions: 30.5" W x 88" H
Frame Shipping Weight: 22 lbs (including graphics)
Frame Shipping Dimensions: 34" L x 14" W x 9" H
Ladder Light Shipping Weight: 8 lbs
Ladder Light Shipping Dims: 7.5" L x 5.5" W x 30.5" H

Shipping

Two cartons, 30 lbs together, so this ships as parcel and the rate calculates at checkout rather than needing freight. Ordering towers and a Bridge together? Ask us to quote the shipment as one rather than letting the cart rate each piece separately.

Choosing between the four options

Single-sided prints one face and backs it with a blockout panel, which is right when the tower stands against drape or a wall. Double-sided prints both faces for a tower people walk around — the usual choice for an archway leg, since both sides are visible. Printed end caps wrap the narrow 14.5 in. sides so the frame edge does not show from an angle; non-printed leaves them plain and costs less.

*Please check your tradeshow guidelines to make sure this configuration conforms to the show regulations. If adjustments to the configuration are required to meet the show requirements please contact us at sales@dgcreativ.com for a custom configuration quote*

Related: Lumiere Light Wall Bridge with Lights · Lumiere Light Wall Door · Same panel, unlit · Request a quote